We are committed to providing you excellent but most cost-effective machines for your wire & cable manufacture.
Steel Wire Armouring Machine for Submarine Power Cable
This is a large Planetary type Steel wire Armoring machine, which is specially designed and used for steel wire armoring process to make Submarine Power cables and Optical Fiber Composite EHV Submarine Power cables.
It is suitable for below metal wires for armoring process:
• Round steel wires
• Flat steel wires
• Copper wires
• Al-mg alloy wires
Features of our Steel Wire Armouring Machine for Submarine Power Cable
1. Planetary type stranding process with 100% back-twist to achieve best armoring quality.
2. Tension for optical fiber units from each bobbin is controlled by Germany ZF brand Hysteresis system to ensure constant tension from bobbin full to empty.
3. Can make both single layer and double layers of steel wire armoring process.
4. With Bitumen filling and PP yarns wrapping processes.
5. Turntable type Pay-off & Take-up are equipped for long length submarine power cables.
6. Individual motor drive system, high working efficiency, intelligent computing parameters.
7. SIEMENS PLC + SIEMENS HMI electrical control system.
8. With decades of manufacture experience, all parts of the entire armoring system are being improved constantly.
| Cage configurations: | Φ630/70B + Φ1600/4 + Φ630/80B Φ710/70B + Φ1600/4 + Φ710/80B |
| Single wire diameter: | 1.0 – 8.0 mm |
| Cage Rotate speed: | 15 rpm |
| Max. Armoring cable diameter: | 280 mm |
As one of the 3 manufacturers of submarine cable equipment. In the past few years, we have successfully made and installed 5 lines of such large steel wire armoring machine specially for submarine power cables manufacture.
