We are committed to providing you excellent but most cost-effective machines for your wire & cable manufacture.
Copper Wire Screening Machine
This machine is mainly used for Copper wire Screening for wire and cable with Copper taping and Non-metallic taping.
It can also be used for small size steel wire armoring for wire and cable.
In the past 10 years, we have totally installed over 50 plane type copper wire screening machine lines serving our wire and cable customers.
Features of our Copper Wire Screening Machine
1. Plane type Copper wire Screening machine, one stranding cage can load many bobbins.
2. Wire Pay-off bobbin available from Φ200-Φ500.
3. The stranding cage and the taping heads are driven by individual motor, stepless adjustable pitch.
4. The center main shaft is a thick-walled whole length of seamless steel tube, not welded.
5. Stranding cage has Front and back dual supporter, stranding capstan is made of thick steel plate.
6. Three bearings supported to improve the rotating speed.
7. Equipped with Wire-break detection device to stop the machine once any wire breaks.
8. PLC + HMI electrical control system.
Note: Custom design or configurations are available upon request.
| Cage Bobbin diameter: | Φ200, Φ250, Φ315, Φ400, Φ500 |
| Single Wire diameter: | 0.8 – 2.5 mm |
| Transmission type: | Individual motor drive / Ground shafts drive |
| Rotate speed: | 55 rpm |
| Line speed: | 40 m/min |
| Bobbin Configuration: | 40B, 60B, 72B, 80B, 96B |
